Third Gen Tundra Switch Panels

Power options are:

• Toyota 12V factory plug
• Toyota Integrated Dual USB Powerport (00016-00225) NOTE these are charge only ports, and do not connect to the head unit
• Aftermarket USB power such as this one FIRST NOTE can fit any outlet that uses a 1.02 in / 26mm hole SECOND NOTE these are charge only ports, and do not connect to the head unit
• Custom power options are available if you'd like to use another outlet, please email to discuss

Installation Options:

• You can self install (includes a trimming guide, and the instruction video is below)
  
• You can ship me you factory bezel and I'll install (3-5 day turnaround once it's received by me. You pay shipping to me, I will pay return shipping.)
• I can supply a new factory bezel (part 55434-0C030) at cost to you. You will receive an installed switch panel. All you need to do is to install switches and power. (2 week turnaround due to lead times on the factory bezel)

• 7 switches
• 5 switches and 2 power/USB
• 4 switches and 3 power/USB

• Short Depth moves the switch positions about 3/4 of an inch forward. They will still be under the "ledge", but will be more visible than stock.
  
• Long Depth moves the switch positions about 1.5 inches forward. the front of the switches will be at the same depth as the lip of the ledge. You will lose the ability to put a cup or bottle into the forward cup holder with the long version, but you gain better switch visibility and ergonomics (they're a lot easier to reach, especially if you have short arms)

Customer installed images:

Short depth, Factory 12V, 4 switches, aftermarket USB:


Short depth, Factory 12V, 2 switches, aftermarket USB, 2 switches, Factory 12V:


Short depth, 5 Switches, one factory 12v power:


Short depth,12v Factory power, 5 switches, aftermarket USB (carbon fiber skin was applied by the customer)